Settings And Programming - KKT KOLBE EB8013ED Benutzerhandbuch

Using the appliance

Settings and programming

Setting the clock
After you have connected the appliance to the mains,
the display will show
Setting the clock
• Press the key and the hour display will flash.
• Rotate the selection knob K2 to adjust the hour.
• Press the key again to set the current minute time.
• Rotate the selection knob K2 to adjust the minute.
• Press to finish clock setting. The „:" will now be shown
constantly and the appliance is ready to use.
Notes:
• When you disconnect the appliance from the mains,
the clock will be reset to
again.
• The backlight of the clock turns off after about 10
minutes.
Switching on the oven light
• Rotate the function knob K1 until the icon
the display next to it.
• To turn on the light, confirm your selection with the
After that, the light will be turned on.
Choosing the heating type
• Rotate the function knob K1 to select your desired heating
mode.
The corresponding icon for the currently selected mode is
shown on the display.
• After that, with the selection knob K2, you can set the desi-
red cooking temperature (instead of the standard setting).
• Press the -key to start the process.
Setting the cooking time
After starting the cooking process, you can set a cooking
time after which the appliance switches off automatically.
• Choose the desired cooking time by rotating the function
knob K1.
• Push the key to confirm your selection.
• When the set time has elapsed, the cooking process stops
automatically with a beep.
46
.
and you have to set it
appears in
How to change the time and temperature
while cooking
• When the cooking process has already started, you can ad-
just the time easily. To do this, simply rotate the function
knob K1 to the desired value. After that, press the
confirm your selection.
Note: When you don't confirm, the appliance will automa-
tically go back to the old setting.
• You can adjust the temperature while the cooking process
has already started. For this, rotate the selection knob K2
to the desired value and confirm with the
Note: When you don't confirm, the appliance will automa-
tically go back to the old setting.
Time display options
During the cooking process, it is possible to switch bet-
ween the display of the remaining time / cooking time and
the current time.
• By pushing the
/ target / current time. After 3 seconds the display will turn
back to the last displayed value.
• By pushing the
time.
key.
Reminder / Alert
The oven has a reminder function, you can put in a period
of up to 9 hours. This function can be activated only when
the unit is in standby mode.
• Press the key
• Rotate the selection knob K2 to adjust the hours to the
alarm.
• Press the key
• Rotate the selection knob K2 to adjust the minutes to the
alarm.
• Press to confirm your setting. The „:" will flash and the
icon will light up. From now on, the count-down will start
• After the set time has elapsed, , the alarm signal will sound
10 times and the
Notes:
• To retrieve the set time until the alarm,
press the
• To retrieve the current time in alarm mode,
press the
key it is possible to display the remaining
key again, you can display the current
in standby mode.
again.
icon will disappear.
key (display approx. 3 sec.).
key (display approx. 3 sec.).
key to
key.