Parkside PBBPS 700 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 124

General Complete tree pruning saw
Saw chain
Chain brake
Guide rail
Before start up Saw chain
Guide rail
Chain lubrication
Chain brake
On/off switch, throttle inter-
lock, throttle lever
Fuel and chain oil tank cap
Daily Air filter
Guide rail
Guide bar mount
Idle speed
Weekly Fan housing
Spark plug
Silencer
Chain catcher
Screws and nuts
Quarterly Suction head
Fuel tank, chain oil tank
Storage complete tree pruning saw
Saw chain and guide bar
Fuel tank, chain oil tank
Carburettor
118 GB
Clean the exterior and check for damage.
In the event of damage, have a professional repair carried out immedi-
ately.
Sharpen regularly, replace in good time.
Have it checked in a specialist workshop at regular intervals
Turn so that the running surfaces wear evenly. Replace in good time.
Check for damage and sharpness.
Check chain tension.
Check for damage.
Functional check
Functional check
Functional check
Check leak-tightness.
Clean
Check for damage, clean oil inlet hole
Clean, in particular the oil guide groove
Check (saw chain shall not run)
Clean in order to ensure trouble-free routing of cooling air
Check, replace if necessary
Check for clogging
Check for damage, replace if necessary
Check condition and firm seating
Replace
Clean
Clean the exterior and check for damage
In the event of damage, have a professional repair carried out immedi-
ately
Remove, clean and oil lightly
Clean guide rail guide nut
Empty and clean
Run until empty