Enabling Or Disabling Ddc/Ci Support - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Enabling or disabling DDC/CI support

The computer and console modules supported by the
are ready to support monitors with
After the function is enabled, the DDC/CI information is transparently forwarded to
the monitor in order to support as many monitors as possible. However, we cannot
guarantee the support for all monitors.
How to configure the DDC/CI support of a console module:
1. Press Ctrl+Num
2. Select the row
3. Under
DDC/CI support
disabled
CPU > monitor
bidirectional
4. Press to save your settings.
F2
DDC/CI functionality.
(default) to open the OSD.
Console setup and press
press to select one of the following options:
F8
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor.
 The transmission of DDC/CI signals is carried out
bidirectionally.
VisionXS-IP-C-DP-UHR
Enter .
G&D VisionXS-IP-C-DP-UHR · 80
Configuration
system