Installing console modules
NOTE:
All device variants of the
power supply at the
Power
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an internal power supply (
The remote console is connected to the
puter connected to the computer module can be operated from this console.
Establishing a connection to a local management network
Transmission 1
Transmission 1
Transmission 2
Transmission 2
Service
Service
NOTE:
If desired, connect this network interface to a local network. This enables
you to access the
Config Panel
log messages to this network.
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
VisionXS-IP
interface (for DT variants:
VisionXS-IP-CON
Network
Pwr Main Power
Pwr Main Power
web application from this network and to send sys-
series can be operated with an external
Main Power
).
Red. Power
console module. The com-
Red. Power
Red. Power
G&D VisionXS-IP-C-DP-UHR · 12
Installation
).