(De)Activating Signals - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time

(De)Activating signals

By default, not only keyboard, video and mouse data but also audio data are trans-
mitted.
In addition, you can enable the transmission of RS232 data and, alternatively,
disable the transmission of audio data.
How to (de)activate the transmission of audio or RS232 signals:
1. Use the remote hotkey Ctrl+ to open the OSD.
Num
2. Select the row and press .
KVM connection Enter
3. Under Activated signals use the arrow keys to check the box of the signal you want
to (de)activate and press F8 .
4. Press F2 to save your settings.
G&D VisionXS-IP-C-DP-UHR · 36