Configuring A Kvm-Over-Ip Connection - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time
4. Enter the following data under
Global
preferences:
Hostname:
Domain:
Gateway:
DNS 1:
DNS 2:
5. Press F2 to save your settings.

Configuring a KVM-over-IP connection

The of the console module (host) as well as the
IP address
module must be specified to establish a
puter module.
The configuration of both the
exchanged between the two modules.
NOTE: The configuration of both the
automatically exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
2. Select the entry
3. Enter the following data under
Control port:
Communication port:
Data port:
4. Press to save your settings.
F2
29 · G&D VisionXS-IP-C-DP-UHR
Main Network
Press F8 to select the global preferences:
uses static settings.
 Static:
 DHCP: obtains settings from a DHCP server.
Enter the device hostname.
Enter the domain the device is to belong to.
Enter the gateway IP address.
Enter the IP address of the DNS server.
Optionally, enter the IP address of another DNS server.
communication ports
+ to open the OSD of computer module.
Ctrl Num
KVM connection and press
Network setting
Enter the number of the port you want to use.
Enter the number of the port you want to use.
Enter the number of the port you want to use.
:
control port
KVM-over-IP connection through the com-
and the
data ports
communication ports
Enter .
:
of the computer
are automatically
and the
data ports
are