Introduction; Intended Purpose - Parkside PMNF 1500 A1 Originalbetriebsanleitung

GB
Content
Introduction ............................... 22
Intended purpose ....................... 22
General description .................... 23
Extent­of­the­delivery .......................23
Functional description ......................23
Overview .......................................23
Technical data ............................ 23
Notes on safety.......................... 24
Symbols and icons ..........................24
General Safety Directions
for Power Tools ..............................25
Safety instructions for cutting ............27
Additional safety instructions
for all applications ..........................29
Additional safety information ............30
RESIDUAL­RISKS .............................30
Assembly ................................... 30
Installing/changing disc...................30
Setting the groove depth ..................31
Vacuuming .....................................32
Operation .................................. 32
Turning on and off ...........................32
Handling .......................................33
Cleaning and servicing ............... 33
Maintenance ..................................33
Cleaning ........................................33
Storage ...................................... 34
Waste disposal and
environmental protection ........... 34
Replacement parts /
Accessories ................................ 35
Troubleshooting ......................... 36
Guarantee ................................. 37
Repair Service ............................ 38
Service-Center ............................ 38
Importer .................................... 38
Translation of the original EC
declaration of conformity .......... 146
Exploded drawing ................... 153
22

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a­final­inspection.­The­functionality­of­your­
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the­applications­specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended purpose

The wall chaser is a tool for cutting mainly
mineral-based­materials­(such­as­concrete­
or­brick)­without­requiring­the­use­of­water.­
This tool should only be used with diamond
cutting disks.
The tool should not be used in any other
application (e.g. cutting with coolant solu-
tions, cutting harmful substances such as
asbestos).
The­device­is­intended­to­be­used­by­do-it-
yourselfers. It was not designed for heavy
commercial use. The tool is to be used by
adults. Children over the age of 15 may
not use the tool except under supervision.
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.