EFOY ProCube 2060A-3 XF Bedienungsanleitung Seite 68

Check the condition (age, state of charge) of your batteries before use. Also
check this condition regularly; after prolonged use, it may be advisable to
replace them.
When using two batteries (series or series connection), use batteries with the
same ageing status.
The next step is to install the EFOY fuel cell. Proceed as follows:
Ensure the correct orientation of the fuel cell on the mounting plate.
When attaching the EFOY fuel cell to the mounting plate, make sure that the
fuel cell is standing straight on the plate and tighten the belt when closing it
to prevent the EFOY from slipping on the plate.
Page 68

Loosen the two knurled nuts and
remove the mounting plate from the
ProCube.

Attach the EFOY fuel cell to the
mounting plate: to do this, open the
belt of the EFOY, thread it through
the openings on the side of the
mounting plate and then close it
again.
Commissioning