Check Valve; Installation Kit For Heat Flow Meter - Cosmo C2PGUWMZ Montage- Und Betriebsanleitung

U N M I X E D P U M P G R O U P D N 2 5 W I T H I N S T A L L A T I O N K I T F O R H E A T F L O W M E T E R
Operation
#
Filling, draining, venting
2 . 4 . 1 C H E C K V A LV E
The pump group is equipped with a check valve (C) in the return line. The check valve can be
opened manually.
During operation, the marking must be directed to "Z".
The check valve is closed.
Flow only in the direction of the arrow.
For filling, draining and venting the installation, the marking must be directed to "A".
The check valve is open.
Flow in both directions.
2 . 4 . 2 I N S T A L L A T I O N K I T
F O R H E A T F L O W M E T E R
The installation kit allows to easily mount a heat flow meter in the return of direct heating
circuits. The installation kit is suitable for the following heat flow meters:
Allmess ultrasonic measuring capsule heat flow meter "Integral-MK UltraMaXX"
Allmess ultrasonic heat flow meter "Integral-V UltraLite PRO"
Allmess ultrasonic compact heat flow meter CF-Echo II 1.5 m³/h and 2.5 m³/h
with the installation lengths 110 mm and 130 mm
Allmess split heat flow meter Megacontrol-CF 51 1.5 m³/h and 2.5 m³/h
Sensus PolluCom C measuring capsule heat flow meter
Sensus PolluCom E(S) single-jet heat flow meter (Attention: Only split version)
Sensus PolluStat ultrasonic heat flow meter 0.6 m³/h; 1.5 m³/h and 2.5 m³/h
with the installation lengths 110 mm and 130 mm
Sensus PolluTherm split system (thread connection) 0.6 m³/h; 1.5 m³/h and 2.5 m³/h
with the installation lengths 110 mm and 130 mm
Heat flow meter with the connecting dimensions ¾" ext. thread x 110 mm
or 1" ext. thread x 130 mm
NOTE
The arithmetic unit must be positioned respectively with the corresponding
wall bracket outside of the pump group.
2 3