Recharging The Battery; Storage; Wall Mounting For Charger - Parkside PLG 20 C1 Originalbetriebsanleitung

Recharging the battery

Allow a hot battery to
cool before charging.
Only charge the battery
(4) when the red LEd on
the charge status indicator
is on.
1. remove the battery (4) from
the appliance, as necessary
(see „Removing/inserting the
battery").
2. insert the battery (4) in the
charging compartment of
the battery charger (5).
3. Plug the battery charger (5)
into a mains outlet.
4. Once charging is complete,
disconnect the charger (5)
from the mains supply.
5. remove the battery (4) from
the charger (5).
Overview of the LED
indicators on the charger:
Green LED (6) illuminated whi-
le the battery is not inserted:
Charger is ready.
Green LED (6) illuminated:
Battery is charged.
Red LED (7) illuminated:
Battery charging.
Red LED (7) flashes:
Overheated
Red (7) and green LED (6) flash:
Battery defective

Storage

store the appliance in a dry
place well out of reach of
children.
Wall mounting for
charger
(optional)
You can also fix the charger (5)
to the wall.
• Using dowels, place two
screws 76.2 mm apart at
GB
23