Parkside PLG 20 C1 Originalbetriebsanleitung Seite 21

• Do not use the charger
if defective and do not
open it yourself. Before
each use, check the
charger, cable and plug.
Only have qualified
personnel repair a de-
fective device and only
use original spare parts.
This prevents hazards
and maintains the safety
of the device.
• Connect the charger
only to a socket with an
earth. Ensure that the
mains voltage matches
the specifications on the
charger rating plate.
Risk of electric shock.
• Keep the charger clean
and away from wet
and rain. Do not use the
charger outdoors. Dirt
and the entry of water
increase the risk of elec-
tric shock.
• Avoid mechanical da-
mage to the charger.
This can result in inter-
nal short circuits.
• The charger must not
be operated on or near
flammable surfaces
(e.g. paper, textiles).
risk of fire due to hea-
ting during charging.
• If the power cable for
this equipment is dama-
ged, it must be replaced
by the manufacturer, a
customer service agent
of the same or a simi-
larly qualified person
in order to prevent ha-
zards.
• do not use the charger
to charge non-recharge-
able batteries.
• To reduce the electric
shock hazard, unplug
the battery charger
from the mains before
cleaning the charger.
• Do not use any acces-
sories that are not recom-
mended by PARKSIDE.
This can result in electric
shock or fire.
GB
21