Before Use; Charging The Battery Pack (See Fig. A) - Parkside PLG 20 C1 Originalbetriebsanleitung

WARNING!
■ To avoid potential risks, damaged mains cables should be
replaced by the manufacturer, their customer service depart-
ment or a similarly qualified person.

Before use

Charging the battery pack (see fig. A)
CAUTION!
► Always unplug the appliance before you remove the battery
pack from or connect the battery pack to the charger.
NOTE
► Never charge the battery pack at an ambient temperature of
below 10°C or above 40°C. If a lithium-ion battery is to be
stored for an extended period, the charge level should be
checked regularly. The optimum charge level is between 50%
and 80%. The storage climate should be cool and dry and the
ambient temperature should be between 0°C and 50°C.
♦ Connect the battery pack
(see fig. A).
♦ Insert the power plug into the socket. The control LED
up red.
♦ The green control LED
complete and the battery pack
PLG 20 C1
to the high-speed battery charger
indicates that the charging process is
is ready.
GB │ IE │ NI │ CY
lights
│ 7 ■