Before Use; Charging The Battery Pack (See Fig . A) - Parkside PAPK 12 A3 Originalbetriebsanleitung

Before use

Charging the battery pack (see fig . A)

CAUTION!
► Always unplug the appliance before you remove the battery pack
from or connect the battery pack to the charger .
NOTE
► Never charge the battery pack if the ambient temperature is below
10°C or above 40°C . If a lithium-ion battery is to be stored for an
extended period, the charge level should be checked regularly . The
optimum charge level is between 50% and 80% . The storage
climate should be cool and dry and the ambient temperature should
be between 0°C and 50°C .
♦ Insert the battery pack
♦ Insert the power plug into the socket . The charge control LED
lights up red .
♦ The green charge control LED
and the battery pack is ready for use .
♦ Push the battery pack
♦ Switch the high-speed charger
successive charging processes . Also disconnect the power plug from
the mains power socket .
PAPK 12 A3 + PLGK 12 A2
into the high-speed charger
indicates that charging is complete
into the appliance .
off for at least 15 minutes between
.
GB │ IE │ NI │ 7 ■