GB
the desired position of a
wall.
• The screw head can have a
diameter of 7 - 9 mm.
• Leave the screw heads
protruding at a distance of
approx. 10 mm from the
wall.
• With the openings of the
wall bracket, you can attach
the charger (5) to the two
screws and pull the charger
down until it stops.
When drilling, be ca-
reful not to damage
any supply lines. Use suit-
able search devices to find
these or consult an instal-
lation plan for guidance.
Contact with electrical
cables can lead to electric
shock and fire. Contact
with a gas line can result
in an explosion. Damage
to a water pipe can lead
to property damage and
electric shock.
24
Cleaning
Clean the charger with a dry
cloth or with a paintbrush. do
not use water or metal objects.
Maintenance
The equipment is maintenance
free.
Waste Disposal/Envi-
ronmental Protection
remove the battery from the
device and take the device, bat-
tery and packaging for environ-
mentally friendly recycling.
Electric units do not
belong with domestic
waste.
Do not throw batteries
into domestic waste,
fire (risk of explosion) or
water. Damaged batteries can
harm the environment and your
health if poisonous fumes or
liquids escape.