Options; Extra Sensor Cable - GF UD2100 Betriebsanleitung

Operating Instructions
8

Options

8.1

Extra Sensor Cable

Each GF flow meter includes 25 ft / 7.6m (or 50 ft / 15m or 100 ft / 30m optional) continuous shielded coaxial pair cable. Additional
cable and Cable Junction Box (Part number 159300343) may be ordered to extend cable up to 500 ft (152m) as required during instal-
lation. No adjustment is required when the sensor cable is extended or shortened.
IMPORTANT: Use only GF shielded coaxial pair (RG174U) cable.
Coaxial Cable Preparation
DXC Doppler sensor cable can be cut and spliced up to a maximum length of 500 ft (152 m). Cable ends must be prepared as
illustrated below.
Sensor Cable Junction Box (159300343)
Watertight steel NEMA4 Junction Boxes with terminal strips (Part number 159300343).
Extended sensor cable should be installed in conduit for mechanical protection. Recommended installation is illustrated below:
TO GF SENSOR
DXC Doppler sensor cable can be cut and spliced up to a maximum length of 500 ft (152 m).
Cable ends must be prepared as illustrated below.
BLACK
INSULATION
HAS BEEN
REMOVED
FROM CORE
3.9 mm
0.15"
MOUNTING
HOLES (x4)
UD2100 Ultrasonic Doppler Flow Meter
BLACK
INSULATION
HAS NOT BEEN
REMOVED
FROM CORE
EXTENDED SENSOR CABLE TO
ELECTRONICS ENCLOSURE
- MAX. TOTAL CABLE LENGTH
500 ft (152m) SHIELDED COAXIAL
PAIR
-CONDUIT RECOMMENDED
FOR MECHANICAL PROTECTION
35