GF UD2100 Betriebsanleitung Seite 20

UD2100 Ultrasonic Doppler Flow Meter
-- DataLogging --------
LogSiteID
Mode
FileFormat
Date May 18/2018
Time 11:27:40
Interval
Data Log
20
Data Logging
0
Press or
Flow
.LG2
cursor before each menu item and
and again to return to the Main Menu.
10sec
60min
Log Site ID
30min
Enter a number from 00 to 99. The site ID will become part of the downloaded file name to
15min
10min
help distinguish downloads from different instruments. Press
5min
2min
1min
Mode
30sec
Select Velocity (e.g. ft/sec or m/sec) or Flow (e.g. USGPM or l/sec). Press
Stop
ting.
Start
Delete
File Format
Choose .LG2 to download data in .lg2 format for viewing on GF Logger software. Choose .CSV
to download data in .csv format for import directly to Excel. This menu option can be changed
at any time without adversely affecting existing data.
Date
Press , and
Time
Press , and
store the setting.
Interval
Press or
choosing an interval which will give you as much resolution as required and no more.
Choosing too often of an interval for what is required will result in larger data files, which
may take a long time to download to USB. Reference page 15 for specific download times. In
critical installations, data should be downloaded often.
Data Log
Stop, Start or Delete the log file. Press
Press or to select Start and
Important Note: You MUST Delete an old log and Start a new log AFTER having made changes
to Log Site ID, Mode, Date, Time and/or Interval for those changes to be applied.
Important Note: Changing any of the parameters in the Units/Mode menu will start a new log.
It is recommended that you Delete and start a new log after changing any Units/Mode set-
tings.
to position curser at Data Logging, and
to enter. When settings are completed press
or to scroll and select Month, Day and Year. Press
or to select the current time in Hours, Minutes and Seconds. Press
to select the logging interval. Press
to start the logger.
to enter. Use
to store the setting.
to store the setting. GF recommends
or to select Delete and  to delete the log file.
Operating Instructions
or to position
to store
to store the set-
to store the setting.
to