Product Description; Intended Use; Use Not In Accordance With The Intended Use; Ec-Declaration Of Conformity - GF UD2100 Betriebsanleitung

UD2100 Ultrasonic Doppler Flow Meter
3

Product description

3.1

Intended use

The GF UD2100 ultrasonic doppler flow meter is a permanent clamp-on flow meter for non-invasive flow measurement.
It is specifically designed for challenging flow applications with dirty, aerated, abrasive, corrosive and/or caustic media – applica-
tions where the most regular flow meters would be defeated.
3.2

Use not in accordance with the intended use

Any use other than that described in the „Intended use" is not in accordance with the intended use and is therefore not permitted.
If unsuitable products are installed or used in safety-relevant applications, unintended operating conditions may occur in the appli-
cation that can cause personal injury and/or property damage.
Only use the product in safety-relevant applications if this use is expressly specified and permitted in the product documentation.
Georg Fischer Piping Systems Ltd. accepts no liability for damage resulting from improper use. The risks associated with improper
use lie solely with the user.
3.3

EC-Declaration of conformity

The manufacturer GF Piping Systems, 8201 Schaffhausen (Switzerland) declares that the following products
Type: Ultrasonic Doppler Flowmeter GF UD2100
Part numbers: 159300320, 159300321, 159300322, 159300323, 159300324, 159300325, 159300326, 159300327, 159300328,
159300329, 159300330, 159300331
comply with the mentioned European directives and standards.
Product group
Ultrasonic Doppler Flowmeter
Applied standards
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements, Part 1: General
•
requirements: Immunity test requirements for devices intended to be used in an industrial electromagnetic environment
European CISPR 11:2009 + A1:2010 / EN 55011:2009 + A1:2010, Class A, Group 1
•
FCC Part 15, Subpart B - Class A Unintentional radiators for use in commercial and industrial environments
•
EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use
•
Schaffhausen, 16.02.2022
Bastian Lübke
Head of Global R&D
Georg Fischer Piping Systems Ltd.
CH-8201 Schaffhausen (Switzerland)
10
Type designation
UD2100
Operating Instructions
Additional directives and harmonized de-
sign standards
2014/30/EU
• •
2014/35/EU
• •
2011/65/EU
• •
•
•
•
•
2006/42/EG
2014/68/EU
2011/65/EU
EN ISO 12100
EN 1349
EN ISO 4414
NE 19