Sensor Mounting - GF UD2100 Betriebsanleitung

UD2100 Ultrasonic Doppler Flow Meter
6.2

Sensor Mounting

Prepare an area 2" wide by 4" long (50mm x 100mm) for sensor bonding by removing loose paint, scale and rust. The objective of site
preparation is to eliminate any discontinuity between the sensor and the pipe wall, which would prevent acoustical coupling.
A PC4 Sensor Mounting Kit is supplied with each GF UD doppler flow meter. It includes recommended coupling compound and a
stainless steel mounting bracket with adjustable pipe straps.
26
Mount the PC4 pipe clamp as adjusted on pipes
0.6" / 15 mm OD or larger, Stainless steel bands
are included for mounting on pipes up to 32" / 81
cm OD.
Additional stainless steel (by customer) may be
combined to mount on pipes up to 180" / 4.5 m
OD.
ADJUSTABLE
STAINLESS
STEEL STRAP
Operating Instructions