Enclosure Heater And Thermostat; Enclosure Sunscreen (159300345) - GF UD2100 Betriebsanleitung

UD2100 Ultrasonic Doppler Flow Meter
8.2

Enclosure Heater and Thermostat

On request instruments can be factory-equipped with an Enclosure Heater and Thermostat or the module can be customer-
installed. The Thermostat is factory set to turn ON at 40°F (4.5°C) and OFF at 60°F (15.5°C). Power consumption is 15 Watts.
8.3

Enclosure Sunscreen (159300345)

Protect Instruments from direct sunlight with this Iridite finished aluminum sun screen (Part number 159300345).
Seal condult entries with caulking compound to further reduce moisture condensation.
Do not mount instrument electronics in direct sunlight. Overheating will reduce the life of electronic components and condensate
may form during the heat/cool cycles and cause electrical shorts.
Note:
Exposure to direct sunlight can cause overheating and
moisture condensation which will reduce the operating life of
electronics.
36
11"
280 mm
Operating Instructions
11" / 280 mm
5"
127 mm