Icons; Display Menus - GF UD2100 Betriebsanleitung

UD2100 Ultrasonic Doppler Flow Meter
5.3

Icons

Icon
5.4

Display Menus

Display
0.00
Tot 20130 USG
Relays 1 2 3 4 5 6
--Messages----------
Data Log Logging
Log Used 0.00000 %
Sensor
14
Description
Message waiting. Press
Data logging off.
Data logging on.
USB file download
File download completed.
Download Error.
Description
Main Display
USG/m
The main display shows the units selected from the Units/Mode menu, flow or velocity rate
being measured, totalizer and relay states. The GF UD2100 will start-up with this display.
Message Icon
Press from the main display to view status of the data logger and error/warning
messages provided by the instrument. The Message Icon will appear on the main display if
Good
error messages are being generated by the instrument. Press
display.
Displays the status of the sensor hardware. Even with the sensor disconnected or shorted,
the GF UD2100 will display Good. To check sensor integrity, use the sensor resistance test
procedure on page 28. If HardwareFault is detected, navigate to the Configuration page in the
Main Menu to determine which circuit board is not communicating.
.
Operating Instructions
to return to the main