8 Fusion
22
8.4
Example ECOS 315/250
Pipe/fitting
Pipe outer diameter
Pressure rating
Wall thickness
All pressure, time and temperature values to be taken out from the corresponding
welding tables!
Equalize
with a pressure of 37 bar until a bead height of 2.0 mm results
Heat soak
for 182 sec with a pressure close to 0 bar
Change-
within maximum 10 sec .
over
Join
Within maximum 11 sec.
Cooling
for minimum 23 min.
Operating instructions ECOS 160/250/315
PE
Heater temperature
200 mm
Drag resistance
SDR 11
Table value
18.2 mm
Adjustment value on hydraulic unit 37 bar
220 °C
6 bar
31 bar