Use; Sieve Adjustment - Grin BIOCH-50 Bedienungsanleitung

Do not use the machine when you are ill, tired or under the influence of medication, drugs or
alcohol.
Before using the machine, it is necessary to learn the layout of the controls and their
operation.
20.

USE

- Wear all required personal protective equipment.
- Check engine oil and fuel levels.
- Check that safety knobs 16 and 17 are fitted and tightened correctly.
- After starting the engine and letting it warm up for about 2 min,
- The machine is ready for use.
- Set the engine speed to maximum.
- Adjust the sieve opening.
- Place the material to be processed in the hopper.
- At the end of the job, bring the engine speed to idle, wait for the engine to idle and switch it
off with the switch provided.
- Wait for the engine to cool down for possible storage.
21.

SIEVE ADJUSTMENT

The sieve makes it possible to adjust the output size of the material, adjust the sieve opening
accordingly by acting on the sieve control lever and locking it with the appropriate knob.
Bear in mind that:
- Position A: Closed sieve = lower processing speed, smaller size of material exiting the
machine.
- Position B: Open sieve = higher processing speed, larger size of material exiting the
machine.
The machine is designed to work with the best performance at 3600 rpm (throttle at
max.).
15
Translation