Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Requirements - Scrapping; Safety Requirements - Transport On Vehicles; Safety Signs - Grin BIOCH-50 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

-
Clean the machine thoroughly;
-
Carry out a general visual inspection of the machine to detect any structural lesions, note
any deep scratches on the paintwork, check that the original safety pictograms are present
in their positions and that they are intact and legible;
-
Grease all mechanical parts, where applicable;
-
Store the machine, if possible, in a covered room on a flat, firm surface;
16.

SAFETY REQUIREMENTS - SCRAPPING

In the event of scrapping, the machine must be disposed of in suitable dumps, in accordance
with current legislation.
Before scrapping it is necessary to separate plastic or rubber parts, electrical and electronic
equipment from metal parts.
Recover any waste oil and dispose of it at the appropriate collection centres.
USED OIL MUST BE APPROPRIATELY RECOVERED AND MUST NOT BE DISPERSED IN
THE ENVIRONMENT, AS IT IS CLASSIFIED AS HAZARDOUS WASTE ACCORDING TO
CURRENT LEGAL REGULATIONS, AND AS SUCH MUST BE DELIVERED TO THE
APPROPRIATE COLLECTION CENTRES.
For the collection of waste oil, it is mandatory to contact the "National Consortium of Waste
Oils".
17.

SAFETY REQUIREMENTS - TRANSPORT ON VEHICLES

Transport of the machine by means of vehicles must only be carried out with the machine
switched off and secured with anchor ropes and everything else that the transporting vehicle
requires for transport in accordance with the regulations in force.
THE USE OF THE MACHINE ON A TRANSPORT VEHICLE IS NOT PERMITTED, FOR
EXAMPLE: ON TOP OF A LORRY, INSIDE A VAN, ETC. THE MACHINE MUST OPERATE ON
THE GROUND, ON A HORIZONTAL AND CONSISTENT LEVEL, AND ALL GUARDS MUST BE FITTED
CORRECTLY.
Ensure the good condition of the safety pictograms. If pictograms are deteriorated, they must
be replaced with originals requested from the manufacturer and placed in the position
indicated in the use and maintenance manual.
Ensure that the safety pictograms are legible. Clean them using a cloth, soap and water.
Translation

SAFETY SIGNS

12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis