Replacing The Bulb - Atag CX4771B Gebrauchsanweisung

Cleaning and maintenance

Replacing the bulb

The bulb is a consumable and therefore not covered by warranty. Before replacing the bulb, remove
all accessories from the oven.
The oven is fitted with a halogen lamp.
This product contains a light source of energy efficiency class (G).
Halogen lamp: G9, 230 V, 25 W
WARNING!
Only replace the light bulb when the appliance is disconnected from power supply.
Firmly re-tighten the screws on the cover using a screwdriver; otherwise, sparks may
appear.
42
1 Undo the four screws. Remove the cover
and the glass.
2 Remove the halogen light bulb and replace
it with a new one.
INFORMATION!
Use protection to avoid burns.
There is a gasket on the cover which should
not be removed. The gasket should fit onto
the oven cavity wall.