Replacing The Oven Lamp - Atag CX46 D-Serie Bedienungsanleitung

CLEANING

Replacing the oven lamp

EN 36
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
The oven is fitted with a halogen lamp.
This product contains a light source of energy efficiency class (G).
The lamp is a consumer item and therefore not covered by warranty.
Replace the defective lamp with a lamp of the same type.
Disconnect the appliance from the power supply by removing the
plug from the socket or by switching off the circuit breaker in the
fuse box.
Please note: the light bulb can be very hot! Use protection to
remove the bulb.
1. Unscrew the cover panel's four screws. Remove the cover panel
and glass.
2. Remove the faulty halogen lamp and replace it with a new one.
3. Replace the cover panel and the glass.
Attention: Do not allow the sealing ring to be detached from the
cover panel.