iBond Total Etch Gebrauchsanweisung Seite 17

Side effects
Allergies to the product or its contents may occur in isolated cases. If an allergy is suspected,
request a list of its contents from the manufacturer. In the event of a skin reaction or an allergy,
do not use this product.
Storage
Store at temperatures of 4 – 25 °C (40 – 77 °F). The product can be stored in refrigerator. Use the
adhesive at room temperature only. Do not expose to direct sunlight. The shelf life will be
reduced by unsuitable storage conditions and the function of the product may be affected. Close
the container tightly immediately after use.
Our instructions for use that are provided orally, in writing and by experiments are offered to the
best of our knowledge. They are nevertheless non-binding, including in regard to third party
trademark rights, and do not release the user from appropriately testing our delivered products
for their suitability for the intended procedures and purposes. The products are used, applied
and processed out beyond our control, and you are therefore exclusively responsible. We of
course guarantee the highest quality of our products in accordance with our general terms of
sales and delivery.
Dateiname:
30421_GBA_iBond_Total_Etch
SAP-Nr: Version
66039608 00
Projektmanager:
Markus Weik
HK-Toolbox-Nr:
W03268
ORT-Version:
07, 6. AK
Druckfarben:
Schwarz
Dated: 01/2009
Maße: Falzmaß:
105x74 mm
Datum HKG Freigabe am
14.01.2009 15.01.2009
Druckverfahren:
Offset
17