iBond Total Etch Gebrauchsanweisung Seite 15

2.2 Conditioning
Proceed as described in 1.
2.3 Application of iBond Total Etch
Make sure that no excess material is left in the corners of the cavity and that the
iBond Total Etch coating is carefully blow-dried before polymerisation.
Otherwise proceed as described in 1.
• Polymerise iBOND
®
instructions above in 1.3).
• Apply resin cement (self-curing or dual-curing resin cement) as directed by the manufactur-
er's instructions for use.
3. Treatment of hypersensitive tooth regions and cleaning the tooth
• Carefully rinse the surface with water and blow-dry.
•
3.1 Conditioning hypersensitive tooth regions
Proceed as described in 1.
3.2 Application of iBond Total Etch
Proceed as described in 1.
Dateiname:
30421_GBA_iBond_Total_Etch
SAP-Nr: Version
66039608 00
Projektmanager:
Markus Weik
Total Etch for 20 s with a halogen or LED polymerisation lamp (see
HK-Toolbox-Nr:
W03268
ORT-Version:
07, 6. AK
Druckfarben:
Schwarz
Maße: Falzmaß:
105x74 mm
Datum HKG Freigabe am
14.01.2009 15.01.2009
Druckverfahren:
Offset
15