Proximity Sensor; Light Sensor; Battery Status; X-Safe - Crosscall CORE-Z5 Bedienungsanleitung

The GPS
This provides the position of the device and the accuracy of the GPS signal. You can fi nd
out the number of satellites in range as well as your altitude.

Proximity sensor

This feature is used to turn off the screen during phone calls when the phone is placed
near the ear.

Light sensor

The light sensor measures the intensity of light projected on the phone screen. It helps
you to optimise your screen brightness based on the ambient light to save your battery
or to optimise readability.
Bluetooth® (5.2), WiFi (6/6E) and cellular networks (2G, 3G, 4G and 5G)
These provide information on the presence and strength of communication networks.

Battery status

This function provides an instant visual indication of the battery charging status.

X-SAFE

X-SAFE is a CROSSCALL app that allows you to quickly and easily raise the alarm in the
event of an emergency.
Step 1: Setting up X-SAFE
1. Open the X-SAFE app. It is enabled on your phone by default.
2. Enter the relevant information: your name and address
3. Then, enter the emergency number(s) you would like to contact if needed:
a. Click on Make emergency call
b. Click on the 3 little dots in the upper-right of your screen.
c. Click on Select a contact if the number is already saved in your contacts, or on
Enter a number if you want to add a number that is not already saved in your phone.
4. You can then choose between two different options to notify your loved ones in
the event of an emergency. You can also combine and activate these two options
simultaneously
a. If you want to send an emergency message: enable Send an emergency message
and click on it to enter the content of the message you want to send.
b. If you want to make an emergency call: Enable Make an emergency call
82
5. Lastly, you can also confi gure some of the app features by clicking on Settings:
a. Enable/Disable LED fl ashing
b. Enable/Disable the audible alarm
c. Enable/Disable the loudspeaker
Step 2: Connecting X-SAFE and the programmable button
By default, the X-SAFE app is linked to programmable button No. 2 (bottom-right of the
phone) and the triple-tap to trigger it.
But you can also choose to link the app to your other programmable button (no. 1, at the
top left of your phone) as well as change the activation mode:
• the triple tap
• the long press
If you want to change the default setting for this app:
1. Go to Settings > Buttons
2. Choose the button to which you want to link this app (1 or 2) as well as the means of
triggering it, and click on it.
3. Then click on the settings icon next to the app fi eld, and choose X-SAFE.
83