X-Link; X-Blocker; Activating Your Core-Z5; Installing The Nano Sim/Micro Sd Card - Crosscall CORE-Z5 Bedienungsanleitung

X-LINK

TM*
THE SMART MAGNETIC ATTACHMENT SYSTEM
This magnetic connector located on the back of your phone can be used to attach and
connect it with ease to exclusive X-LINK
TM*
Depending on the accessories used, the X-LINK™* system also lets you charge your
phone and/or transfer data.

X-BLOCKER

THE REINFORCED MECHANICAL MOUNTING SYSTEM
In situations that require maximum hold, this exclusive accessory supplied with your
mobile guarantees the secure attachment of your phone to compatible accessories
(20kg pull force). It is easily attached to the slots on the side
of your mobile. The silicone coating reduces vibrations caused by knocks.
Before starting an activity, check that your X-BLOCKER is properly inserted into the two
slots on the phone.
See the full range of accessories compatible with the X-LINK
www.crosscall.com
accessories.
and X-BLOCKER at
TM*
58

ACTIVATING YOUR CORE-Z5

Installing the nano SIM/micro SD card

1. Check that your device is turned off. If not, switch it off by pressing the On/Off
button.
2. Eject the nano SIM/micro SD card tray using the tool provided, inserting it into the
hole designed for this purpose, as shown below.
3. Remove the tray completely.
4. You can insert 2 nano SIM cards and one micro-SD card into your phone.
a. To ensure optimal compatibility with operator services, insert your nano SIM
card, metal side down, in the smallest compartment (SIM 1).
b. If required, you can insert a second nano SIM card, metal side facing
downwards, into the middle compartment (SIM 2) and/or a micro SD card
(maximum 1024 Go) into the left compartment.
SIM 2 SIM 1
sim 2 sim 1
5. Slide the tray back into the phone.
a. Make sure the cards are properly aligned.
b. Check that the tray is properly aligned with the slot in the phone when you
slide it back in.
c. Insert the tray and push it in, as shown above.
Important: In order to guarantee that your smartphone is sealed and waterproof,
make sure that the tray is fully inserted and locked.
SIM 1
sim 1
MICRO SD micro sd SIM 2 SIM 1
sim 2 sim 1
59