Glove Mode; Nfc; Battery Sharing; Charging Animation - Crosscall CORE-Z5 Bedienungsanleitung

This function is particularly useful in situations where your power button is difficult to
access: on an X-BIKE, an X-CAR PRO, etc.
To enable/disable this function, go to Settings

Glove mode

Activating this mode will increase the screen's sensitivity so that you can use your
smartphone while still wearing your gloves.
1. Open the phone's notification panel by swiping down from the top of the screen.
2. In the white banner at the top of the screen, click on the
glove mode, which lets you use your smartphone and touch the screen even when
wearing gloves.

NFC

The NFC antenna of your CORE-Z5 is located on the upper-left section on
the rear of your phone.
Make sure to position this part of the phone correctly on contactless readers
(payment terminals, transport terminals, badge readers, etc.) for optimal
operation.

Battery sharing

With the CORE-Z5, you can now charge another phone or accessory using your battery
power.
This function is automatically activated when you connect a second phone or accessory
via a USB-C cable.
The Battery Share icon in your notification panel lets you:
• check that charging is in progress
• reverse the charging direction if necessary (in the case of two phones)

Charging animation

When your phone is charging, you can display the phone name and battery level using a
proximity sensor that detects the movement of your hand.
This feature is particularly useful in the case of a company that has a fleet of mobile
phones and uses the POWER STATION to charge the phones in its fleet: with a quick
wave of your hand, you can easily find your phone.
> Screen > Screen wake.
icon to enable/disable
80
To activate this function, go to Settings
when charging.

Attaching the safety leash*

* Leash not included

Calculator

The Calculator app lets you to perform simple and complex calculations.
1. Tap in your phone's menu.
2. Change the screen orientation to switch from the standard calculator to the scientific
calculator.

CROSSCALL APPS

X-SENSORS

X-SENSORS is an app that provides you with information about the sensors built into
your CROSSCALL mobile phone.
When you open the app for the first time and before using it, please read and agree to
the terms and conditions of use by clicking "Agree".
The magnetometer
This tool acts as a compass, measuring the orientation of the phone in relation to
magnetic north. Calibrate your compass by following the on-screen instructions.
The accelerometer
The accelerometer measures and observes the phone's acceleration in space along
3 axes. It uses mathematical integration to measure the device's speed of movement
while tracking its position.
> Screen > Enable/Disable Information
81