Switching The Phone On And Off; Tips And Precautions For Charging Your Battery - Crosscall CORE-Z5 Bedienungsanleitung

Switching the phone on and off

Press and hold the phone's On/Off button and wait a few seconds until the display
screen turns on.
When you switch on your phone for the first time or after performing a data reset, follow
the on-screen instructions to set up your device.
Once the phone is on, this button can also be used to:
• Lock/Unlock your touch screen with a single short press
• Access emergency calls, switch off, restart and stealth mode by pressing and
holding.

Tips and precautions for charging your battery

1. Open the dust cap and connect the cable and AC adapter
supplied in your pack using the USB-A port. Then plug the
other end of the cable into the USB-C port on your phone.
2. Plug the mains adapter into an electrical socket.
3. When the battery is fully charged, unplug the phone from
the charger. First unplug the charger from the device, then
unplug it from the electrical outlet.
Never charge your phone using the X-LINK
connection together, as this could shorten the lifespan of your phone's equipment.
The battery is built into the phone and is not removable. Do not remove the battery
yourself.
magnetic connection and the USB
TM*
60
• To avoid prematurely draining the device battery, we recommend that you follow the
battery charging instructions for each charging cycle. To do this, it is better to top
up the battery when it reaches 20% and avoid charging it beyond 80%, rather than
topping it all the way up to 100% from zero.
• Only use approved chargers and cables that are compatible with your phone. Using
unapproved chargers or cables may cause the battery to explode or damage the phone.
• Avoid using your phone while it is charging. Do not cover your phone or the AC adapter.
• Connecting the charger incorrectly could seriously damage your phone. Any damage
caused by misuse is not covered by the warranty.
• Remove the charger from the electrical socket when the phone is not charging.
• The phone may not switch on straight away if you are charging a drained battery. Once
it has been charging for a while, the phone will start normally.
• If the mains power supply is lower, your phone may take longer to charge.
• If you use unconventional chargers such as computers, the charging time may be
longer.
• The charging time may vary depending on the ambient temperature and the remaining
battery level.
• The phone can be safely charged at a temperature between 0 °C and 40 °C. Charging
at temperatures below 0°C or above 40°C may compromise battery performance and
shorten battery life. Prolonged charging at extreme temperatures will damage the
battery.
• During charging, the phone and charger may become hot. This is completely normal
and should not reduce the life or performance of the phone. If the battery seems hotter
than usual, stop charging it. Put your phone in a cool place and leave it to cool. Avoid
prolonged contact with the surface of your phone when it is hot.
The device's features may vary depending on your location, language, operator
and model. This device is OTG compatible. Please use a standard OTG cable.
61