Bartscher 900-Serie Bedienungsanleitung Seite 75

Electric oven (Fig. 44-pag.12)
Before turning on the electric oven, it is necessary to select the type of cooking desired in the
following way:
- turn the knob (1) into the desired position, full heating
gratin .
- regulate the cooking temperature desired with the thermostat (2), the two lights come on. The
green light stays on to indicate the presence of electrical tension, while the orange one goes off
as soon as the oven reaches the temperature.
- to turn off, turn one of the two knobs back into position 0.
Glass ceramic electric cooker (fig. 45 –pag. 13)
To switch on a plate proceed as follows:
- Rotate the knob (1) in the desired position; the lamp (2) switches on to indicate that the chosen
plate is on (the chosen zone will become red on the glass ceramic surface). This knob (fig.46
pag.13) is linked to the power regulator, by rotating it the machine switches on. In relation to
the position the plate work in a cycle of switching on and off in order to maintain a constant
radiance temperature. By choosing a bigger area marked on the knob the switching on time
becomes higher than the off one. Between the limit of the maximum area and the indicator the
plate works always at the maximum supplied power.
- In order to avoid uncontrolled and dangerous rise up of the temperature, the machine is
equipped with an automatic safety thermostat which intervene to a fixed temperature.
Safety rules for the user
 The heated area (glass ceramic) heats consequently to the heating of the bottom of the
pot. In order to avoid burnings, do not touch the heated area.
 To avoid any overheating of the bottom side of an empty pot, do not heat unintentionally the
bottom side.
 Danger of burning! We suggest to use an athermic glove.
 Do not interpose paper, carton, clothes etc.. between the bottom of the pot and the heated
area because they might set on fire.
 Since the metal objects are heated very quickly, do not place on the working surface any
other metal object different than pots (for instance closet cans, aluminium foils, table ware,
jewels, clocks etc...)
 Avoid any liquid to get into the machine and that any water or food get out of the pots. Do
not clean the cooking surface with a water jet.
 If it occurs that the cooking surface breaks, turn off the cooking unit and unplug it from the
electric feeding. Don't touch any part/component inside the machine.
 Do not ever clean with a water jet.
 Do not touch any part inside the machine.
Abnormal functioning
If for any reason, the appliance does not start or stops working during use, check that the energy
supply and the control knobs are set correctly; if all is regular, call customer service.
, cooking from the bottom
Pag. 73/100
, au