Before First Use; Cleaning Before Use - hanseatic HBCO7010PA1 Gebrauchsanleitung

3. Insert the hob plugs into the sockets on
the back of the oven. Do not use any
force. The plugs are coded. Polarity rever-
sal is therefore not possible.
4. Insert the mains plug into a properly in-
stalled socket
5. Keep the oven centred and push it fully
into the built-in cabinet.
The mains connection must not be kinked,
pinched or otherwise damaged.
6. Screw the oven to the built-in cabinet with
the two screws which have been sup-
plied.
Installing the oven

Before first use

1. Remove all transport safety devices
(cardboard strips, etc.) and all adhesive
strips from the oven.
2. Turn all the oven's dials to zero.
3. Switch on the fuses for the relevant elec-
trical circuit.
4. Thoroughly clean the oven before first
use.

Cleaning before use

Clean the oven before using it for the first time
in order to properly remove all production and
transport residues. This not only helps protect
your health but also ensures delicious cakes
and roasts.
1. Leave the dripping pan, baking tray and
oven rack in the cooking compartment.
Switch the oven on and let it run for approx.
30 minutes at 250 °C.
It is normal for a slight odour to develop. If
necessary, open the kitchen window.
2. After switching off the oven, open the
oven door and allow the oven to cool
completely.
3. Remove the dripping pan, baking tray and
oven rack and clean and rinse off all piec-
es as well as the cooking compartment.
Then dry everything off.
4. All further instructions on how to operate
the oven can be found from page EN-13.
Page EN-39