HBM CMA Bedienungsanleitung Seite 7

S The device is delivered from the factory with a fixed hardware and software
configuration. Changes can only be made within the possibilities
documented in the manuals.
S The device is maintenance free.
S Please note the following points when cleaning the housing (see also
Chapter 10, Page 39):
- Disconnect the device from all current and voltage supplies before
cleaning it.
- Clean the housing with a soft, slightly damp (not wet!) cloth. Never use
solvent as this could damage the labeling or the housing.
- When cleaning, ensure that no liquid gets into the device or connections.
S In accordance with national and local environmental protection and material
recovery and recycling regulations, old equipment that can no longer be
used must be disposed of separately and not with normal household
garbage, see Chapter 11, Page 40.
Qualified Personnel
Qualified persons means persons entrusted with the installation, fitting,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
This includes people who meet at least one of the three following requirements:
S Knowledge of the safety concepts of measurement and automation
technology is a requirement and as project personnel, they must be familiar
with these concepts.
S As measurement or automation plant operating personnel, they have been
instructed how to handle the machinery. They are familiar with the operation
of the equipment and technologies described in this documentation.
S As commissioning engineers or service engineers, they have successfully
completed the training to qualify them to repair the automation systems.
They are also authorized to activate, ground and label circuits and
equipment in accordance with safety engineering standards.
CMA
A02559_04_YI0_01 HBM: public
Safety instructions
5