HBM TTS Montageanleitung Seite 6

Safety instructions
Symbol
CAUTION
Notice
CE mark
Statutory marking requirements for waste disposal
the local authorities or the dealer from whom you purchased the product.
Conversions and modifications
The transducer must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall
exclude all liability on our part for any damage resulting therefrom.
Qualified personnel
The transducer must only to be installed and used by qualified personnel,
strictly in accordance with the specifications and with safety requirements and
regulations. It is also essential to observe the appropriate legal and safety
regulations for the application concerned during use. The same applies to the
use of accessories.
4
Significance
This marking warns of a potentially dangerous situa­
tion in which failure to comply with safety require­
ments can result in slight or moderate physical injury.
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele­
vant EC directives (the declaration of conformity is avail­
able at http://www.hbm.com/HBMdoc).
National and local regulations regarding the protection of
the environment and recycling of raw materials require
old equipment to be separated from regular domestic
waste for disposal.
For more detailed information on disposal, please contact
A01571_04_Y00_00 HBM: public
TTS