Connector Pin Assignment - HBM TTS Montageanleitung

6.2

Connector pin assignment

The transfer torque wrench comes supplied with a ready‐made 6‐wire
connection cable (six‐wire circuit).
The pin assignment for the HBM amplifier can be found in the following table:
1
9
15
8
Top view
Extension cables should be of the shielded, low‐capacitance type. HBM pro­
vides the 1‐KAB254‐10 cable (ready‐made) and the KAB8/00‐2/2/2 cable (by
the meter, can also be supplied with fitted connecting plug) specifically for this
purpose.
TTS
Pin Wire color
1 yellow
5 black
6 blue
8 white
12 gray
13 green
15 red
A01571_04_Y00_00 HBM: public
Electrical connection
Connection
Shielding connected to enclosure
ground
Excitation voltage (-U
Excitation voltage (+U
Measurement signal (+U
Sensor circuit (-)
Sensor circuit (+)
Measurement signal (-U
)
B
)
B
)
A
)
A
15