Cleaning And Maintenance; Cleaning; Exchanging The Line Spool - FLORABEST FRT 550 A1 Originalbetriebsanleitung

GB IE NI
Cleaning and
maintenance
Always disconnect the plug from
the mains socket before working on
the trimmer.
Any work that is not
described in these Instructions
must be carried out by a
servicing agency authorized
by us. Only use original parts
and be very careful with the
line cutter during installation
work. Danger of injury!
Disconnect the plug from the mains socket
after every use and check the machine
for damaged parts.

Cleaning

Do not jet water onto the
trimmer and do not clean it
under flowing water. This
would result in the danger of
an electric shock and the
trimmer could be damaged.
Always keep the trimmer clean.
Do no use cleaning agents and
solvents.
• After the work has been completed
remove all grass and soil from the
cutting head with line spool (11) and the
protection cover (10).
• Ensure that the ventilation slots are
always clean and free of grass.
• Clean the trimmer with a soft brush or a
cloth.
110

Exchanging the line spool

Never manipulate the cutting
device by inserting worn
out original or alien parts.
Only use original spare parts.
Never use metal lines. The
use of alien parts can result
in serious personal injury and
cause irreparable damage to
the trimmer and the guarantee
will become instantly null and
void.
1. Disconnect the plug from the mains
L
socket.
2. Turn over the trimmer so that the
cutting head with line spool (11) is
facing upwards.
3. Press both line spool hood release
buttons (18) on the line spool hood
(17) at the same time and take off
the line spool hood (17).
4. Remove the empty line spool (16).
5. Free both ends of the new spools'
line from their clamping. Guide
both line ends through their
respective line outlet eyelet (20) with
the smooth side with arrow facing
upwards. Ensure that the line ends
do not slip out of the spool slots.
6. Insert the new line spool (16) into
the cutting head.
7. Return the line spool hood (17).
Ensure that the line spool hood
release buttons (18) are accurately
inserted in the corresponding
recesses of the cutting head with
line spool (11). They lock in audibly.
8. Adjust the lines manually. (See
"Lengthening the cutting lines" ).
9. Connect the machine to mains
socket and switch on to check the
auto feeding function