General Description; Package Contents; Survey; Functional Description - FLORABEST FRT 550 A1 Originalbetriebsanleitung

General description

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.

Package contents

Carefully unpack the lawn trimmer and
check that it is complete.
Dispose of the packaging material correctly.
• Lawn trimmer
• Secondary handle assembly
• Protection cover
• 1 piece cross-head screw
• 1 piece replacement line spool
• Instruction manual

Survey

1 Upper handle
2 ON / OFF switch
3 Cable strain relief
4 Power cable
5 Screw sleeve
(for length adjustment)
6 Telescopic tube
7 Control button for edger function
8 Control button for motor head
adjustment
9 Motor head
10 Protection cover
11 Cutting head with line spool
12 Plant guard
13 Fixing screw
(for secondary handle)
14 Fixing bracket
(for secondary handle)
15 Secondary handle
16 Line spool (not shown)
17 Line spool hood
18 Line spool hood release buttons
19 Line cutter
20 Manual line feed button
21 Line outlet eyelets

Functional description

The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
lines rotating parallel with ground level.
An additional chassis facilitates edge
trimming.
A hood covering the cutting device
protects the user. The following describes
the functions of the operating parts.

Technical data

Electric lawn trimmer ....FRT 550 A1
Rated input voltage....... 230V~,50Hz
Power input................................. 550 W
Idle speed............................ 10000 min
Weight ....................................... 2.5 kg
Dual line.............. 2 x 5 m, fully automatic
Cutting circle dual line.................290 mm
Line thickness dual line.................1.4 mm
Protection Class................................
Protection category ......................... IP20
Sound pressure level
(L )................ 80.2 dB(A), K
pA
Sound power level (L
guaranteed .......................... 96 dB (A)
measured....94.5 dB(A); K
Vibration (an) .....front handle: 2.40 m/s
rear handle: 3.07 m/s
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the
declaration of conformity. The vibration
and noise measuring processes in
accordance with EN 786, appendices D
and E, were completed successfully.
Technical and optical changes may
be undertaken in the course of further
development without notice. All
dimensions, references and information in
this instruction manual are therefore not
guaranteed. Legal claims made
GB IE NI
=3 dB(A)
pA
)
wA
=1.91 dB(A)
wA
2
, K= 1.5 m/s
97
-1
II
2
,
2