Cutting Grass - FLORABEST FRT 550 A1 Originalbetriebsanleitung

Caution: Always remove grass
residue from the line cutter (19)
so that the cutting effect is not
impaired.

Cutting grass

WARNING. Danger of injury!
• Do not cut moist or wet grass.
• Before starting the trimmer check
that the cutting head will not
come into contact with stones,
rubble or other foreign bodies.
• Switch on the trimmer before
you approach the grass that is
to be cut.
• Always trail the extension cable
behind you. Do not pass the
operating trimmer over the
extension cable as the cable
could be damaged.
• Do not overload the trimmer
during operation.
• Avoid contact with obstacles
(stones, walls, fences, etc.) as
this
will rapidly wear out the lines.
• Do not deposit the cutting head
with line spool (11) on the
ground during operation.
• Ensure that the cutting head
with line spool (11) has
stopped before you deposit the
equipment on the ground.
Cut slowly, keeping the machine
H
inclined forward approx.
30°when cutting.
Cut the grass by swaying the
I
trimmer sideways to the right and
left.
Cut tall grass by a series of levels
J
from top to bottom.
Adjust the motor head (9) to cut
E
the grass underneath bushes or
flowers.
Use the plant guard (12) to
F
protect flowers or other plants
when cutting the surrounding
grass.
Using the machine as edger
1. Adjust the motor head (9) to be
K
perpendicular with telescopic tube
(6).
2. Pull the edger function button
(7) back towards the telescopic
handle.
3. Turn the motor head (9) 90°to
the left / right for left handed /
right handed use. Release the
edger function button. The motor
head must lock in position with an
audible "click".
4. Adjust the telescopic tube (6) and
secondary handle (15) to suit the
alternate function.
GB IE NI
109