Maintenance; Consumables For Assembly, Maintenance And Care - ATH RG 5.5 WG Bedienungsanleitung

4

MAINTENANCE

To ensure safe operation of the machine, the user is obliged to maintain the machine regularly.
Repair work may only be carried out by authorized service partners or by the customer after consultation
with the manufacturer.
Before maintenance and repair work must:
Disconnect the machine from ALL power supplies.
Disconnect the main switch from the mains and, if necessary, release the compressed air
from the system.
Suitable measures must be taken to prevent the machine from being switched on again
Work on electrical elements or on the supply line may only be carried out by qualified
persons or electricians.
4.1

Consumables for assembly, maintenance and care

Hydraulic oil
Minimum requirement
Eni PRECIS HVLP-D Part No.: 00067218
Summer
Winter
Preservative for ropes, welds, screws, corners, edges and cavities
Minimum requirement
Petec Spray translucent
Petec suction can translucent
Petec UBS gun
Lubricant for slideways
Minimum requirement
LAGERMEISTER WHS 2002 White EP high-performance grease
Lubricant for bushings, chains, rollers & moving parts
Minimum requirement
White Ultra Luber spray can
® Copyright ATH-Heinl GmbH & CO.KG, All rights reserved / Misprints and technical changes reserved
(15° to 45°)
(below 10°)
500 ml
1000 ml
500 ml
Release date: 10-2022 / Product manufacturer ATH-Heinl GmbH & CO. KG
HVLP-D 32 (e.g.: Eni PRECIS HVLP-D)
HVLD-22 (e.g.: Eni PRECIS HVLP-D)
Item no.: 73550
Item no.: 73510
Item No.: 98507
Item No.: 34403
Item No.: KPF1-2K-20
37