Self-Diagnosis - ATH RG 5.5 WG Bedienungsanleitung

9. Set the voltage to about 24.5 V and wait 10 seconds until the output is stable, then press the Max
button on the screen.
10. Wait 10 seconds for the system to successfully save the setting.

Self-diagnosis

ESC
1
Press this button to return to the settings page
When a function is active, the corresponding icon lights up.
Example:
When the Lift key is pressed on the control panel, the Lift key icon lights up on the display.
You can use this function to determine if a function has a problem.
® Copyright ATH-Heinl GmbH & CO.KG, All rights reserved / Misprints and technical changes reserved
36
Release date: 10-2022 / Product manufacturer ATH-Heinl GmbH & CO. KG