Unit Description - Beurer BM 34 Gebrauchsanleitung

3. Unit description

1
3
2
1. Cuff tube
2. Cuff
3. Cuff connector
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Pulse icon
Cardiac arrhythmia
icon
6. Number of memory space
7. Inflate/deflate arrow
8. „Change battery" icon
9. WHO classification
7
4
6
4. Cuff connector port (left
side)
5. Memory button MEM
6. START/STOP button
7. Display
1
9
6
7
8
5
4
4. Prepare measurement
Inserting battery
Remove the battery
•
cover from the back
of the monitor.
Insert four AA 1.5 V
•
alkaline batteries.
making absolutely sure that you
insert them with the correct polarity
5
as marked. Never use rechargeable
batteries.
Replace the battery cover carefully.
•
If the battery change „
measurement is no longer possible and you must replace
all the batteries. Once batteries have been removed from
the device, the time must be reset. The stored measured
values are last.
Used batteries do not belong in the household waste. You
2 are legally obliged to dispose of the batteries. Dispose of
them via your specialist electrical supplier or local collec-
ting point for recyclable waste.
Note: Batteries containing pollutant substances
are marked as follows: Pb = Battery contains
3
lead, Cd = Battery contains cadmium, Hg =
Battery contains mercury.
setting date and time
It is vital to set date and time. Only in this way is it possible
to save and subsequently retrieve your measured values
with the right date and time.
12
4xAA(LR6) 1,5 V
" is continuously illuminated,