Copying Created Cues; Inserting New Cues - Oase Easy Control Installation Und Programmierung

4.4.5

Copying created cues

Should you need a cue at a different position within the sequence (or in a different sequence) once
again, it is not necessary to reprogram a new cue with the same settings. Select the cue to be copied
with a mouse click, then actuate the "Copy" button on the right next to the arrow keys. Now press the
"Paste" button to insert this cue at the desired position. If you wish to insert the cue in a different
sequence, click on this sequence after having pressed the "Copy" button. Then select the position where
to insert this cue and press the "Paste" button.
To insert the cue now, press the "Paste" button.
4.4.6

Inserting new cues

If you wish to create a new cue at a position inside the the cue list, it is not necessary to newly program
this cue and then shift it to the desired position using the arrow key. When you mark a cue within the cue
list, the "Append" button with change to the "Insert" button. When you now actuate the "Insert" button,
the known text input window appears again, asking you to name the new cue. Confirm your entry with
"OK", or end the creation of the new cue with "Quit".
The new cue then appears beneath the cue previously selected with a mouse click.
In this example, cue 4 was
marked and the "Copy"
button pressed. The "Paste"
button is now activated.
The "Paste" button
actuated. The new cue now
appears under the same
name as the original cue.
- GB -
is
59