Changing Positions Within A Sequence - Oase Easy Control Installation Und Programmierung

- GB -
Start over port:
Once transferred to the interface, sequences can be started over the external port switch. For this
purpose, enter the respective port number (see table on page 12) in the test input window.
You can save your entries by pressing the "OK" button. Your entries can be discarded by clicking on the
"Cancel" button, this action will return you to the main mask.
4.3.5

Changing positions within a sequence

The arrow keys
move a sequence, the latter has to be marked first by a mouse click. Following this, actuate one of the
two arrow keys to shift the sequence by one position up or down.
The "Sequencer" button on the right of the arrow keys just mentioned will be subject to more detailed
information later in this manual.
56
and are used to change positions within a sequence. To be able to