Cues; Creating Cues; Deleting Cues - Oase Easy Control Installation Und Programmierung

4.4

Cues

A CUE is a momentary situation of the DMX output.
We wish to explain in more detail how to program this kind of setting.
You should start by grouping the required channels, as described above, in order to gain a better
overview.
We work on the basis that we only require the channels 1, 3, 5, and 7. This group has been given the
name "Group 1".
4.4.1

Creating cues

Now press the "Append" button to be able to create a cue. Following this a text input window will appear
requesting you to enter a name for the cue. As a default setting, "Cue X" appears (X representing the
number of a sequential numbering). This suggestion can be replaced by the entry of a name chosen by
you. Note: You have to confirm this entry by pressing the "OK" button. When you press the "Quit"
button, your entry will be discarded.
When you have confirm the cue's name, the new cue will appear in the list of the "Cues" screen section.
Now use the faders to set the required initial values. Each change to the faders will be directly saved
in the currently selected cue.
4.4.2

Deleting cues

If you wish to remove one of your cues, select the cue in question, then press the "Delete" button. This
is followed by the safety confirmation, which you answer by pressing "Yes". If you confirm with "No",
your cue will be retained and you return to the main mask.
- GB -
57