Renaming Cues; Changing Cue Properties - Oase Easy Control Installation Und Programmierung

- GB -
4.4.3

Renaming cues

To be able to rename your cue, mark the latter with a mouse click. Then press the "Rename" button.
Now the text input window appears again requesting you to enter the new name. Note: You have to
confirm this entry by pressing the "OK" button. If you click on the "Quit" button, your entry will be
discarded and you return to the main mask.
4.4.4

Changing cue properties

As in the "Sequence" screen section, the "Prop." button is used here again for further settings regarding
this cue.
Fade time
Fade time is the time required for fading from the values of the last cue to the stored values of the
following cue.
Enter the respective number of seconds when making this setting.
Wait time
The bottom field allows you to set the wait time for the cue following the fade time, before changing over
to the following cue. Presettings: fade time = 0, wait time = 1. This means: the cue runs up directly and
switches over to the next cue after 1 second. The wait time can also be changed in "Overview". See
chapter "Overview" to learn more about this.
Changing the position of a cue in the cues list
It is possible to also change the cues using the two arrow keys beneath the cues list.
Key shifts a cue up by one position,
whereas key
58
shifts a cue down by one position.