Essential Requirements; During Use; Scope Of Delivery - Nouvag HighSurg 11 Bedienungsanleitung

3.4

Essential requirements

The HighSurg 11 may only be operated by
qualified and trained personnel.
The use of third-party products is the
responsibility of the operator.
Functionality and patient safety cannot be
guaranteed with third-party accessories.
Repairs may only be performed by
authorized NOUVAG service technicians.
3.5

During use

The device is not sterile on delivery. All
sterilizable parts must be sterilized before
use (see Chapter 8 Cleaning, disinfection
and sterilization).
Handpieces and Shaver blades may only
be attached when the electronic motor is
at a stand still.
To prevent injury, never touch drill bits or
burrs while they are still running.
The user must ensure that as little friction heat as possible is generated during a procedure on a patient.
High speeds and high application pressure may cause thermal necrosis of tissue.
4

Scope of delivery

Ref. Description
3361 HighSurg 11 control unit --------------------------------------------------------------------------------------------- 1 unit
1866nou Vario pedal; IPX8; electronic --------------------------------------------------------------------------------------- 1 unit
2099 Electronic motor 21 incl. 3 m motor cable, up to 50,000 rpm --------------------------------------------- 1 unit
6024 Tube set, sterile, 3 m, single-use ----------------------------------------------------------------------------------- 1 unit
1873 Clip set (10 pieces) for tube set attachment at motor cable ------------------------------------------------ 1 unit
1707 Irrigation fluid; 0.9% sodium chloride/water solution, 1 liter ---------------------------------------------- 1 unit
1770 Stand for irrigation fluid --------------------------------------------------------------------------------------------- 1 unit
1170 Handpiece cradle------------------------------------------------------------------------------------------------------ 1 unit
1974 Spray nozzle for Nou-Clean spray; for care and maintenance of electronic motor ------------------- 1 unit
1958 Spray nozzle for Nou-Clean spray; for care and maintenance of instruments ------------------------- 1 unit
31998 User Manual HighSurg 11 on CD-ROM --------------------------------------------------------------------------- 1 unit
In line with regulations pertaining to hazardous materials, the following items are not delivered with
the control unit and must be ordered separately:
1984 Nou-Clean maintenance and care spray ------------------------------------------------------------------------ 1 unit
4
Repairs may only be performed by authorized
NOUVAG service technicians.
Prior to using the device, before startup, and before
operation, the user must always ensure that the
device and accessories are in good working order
and are clean, sterile and operational.
Use Nou-Clean spray for maintenance and care of
the motor, handpieces and contra angles. Using
other care products can result in malfunctions
and/or cause the warranty to be revoked.
At the choosing of the instrument the operator has
to make sure it's biocompatible, according to
EN ISO 10993.
Never operate the clamping mechanism of the
handpieces or contra angles while the system is
running. This could result in instrument damage.
Do not use device in the vicinity of flammable
mixtures!
HighSurg 11, Operating Instructions, Ref. 31998, V14/15
HighSurg 11
Quantity