Assembly Of External Irrigation System - Nouvag HighSurg 11 Bedienungsanleitung

8. Insert the spike at the end of the tubing set into the irrigation fluid bottle and hang the bottle onto the
stand.
9. Open the roller clamp on the tubing set as far as it will go.
10. Open the bleed valve beneath the drip chamber.
11. Connect the control unit to the power socket.
At the choosing of the instrument the operator has to make sure it's biocompatible, according to
EN ISO 10993.
Ensure that the operating voltage setting corresponds to the local mains voltage.
6.4

Assembly of external irrigation system

A
Ref. 1873
A
B
B
C
C
8
8
A
Ref. 1881
A
C
9
A) Secure motor cable clips and handpiece clips to the
irrigation tube.
B) Connect the tube set with the external cooling tube of
the Instrument (Example: Shaver blade).
C) Secure clips to the handpiece and to the motor cable.
If required, secure additional clips to the motor cable.
HighSurg 11, Operating Instructions, Ref. 31998, V14/15
HighSurg 11
10