Fitting The Cim Module - Grundfos MAGNA3 Montage- Und Betriebsanleitung

17.4 Fitting the CIM module

Warning
Before fitting the module, switch off the power supply. Make sure that the power supply cannot be accidentally
switched on.
Step Action
1 Remove the front cover from the control box.
2 Fit the CIM module as illustrated and click it on.
Fit and tighten the screw holding the CIM module and
3
secure the earth connection.
For connection to fieldbus networks, see separate
4 installation and operating instructions for the desired
CIM module.
Illustration
39