Additional Safety Instructions - Parkside PBSA 12 D2 Originalbetriebsanleitung

GB IE NI
jects, which could cause
bridging of the contacts. A
short circuit between the battery
contacts may cause burns or
fire.
d) If used incorrectly, liquid
may leak from the bat-
tery. Avoid contact with
this. In the event of ac-
cidental contact, rinse off
with water. If the liquid gets
into eyes, seek medical assis-
tance. Leaking battery fluid may
cause skin irritations or burns.
e) Do not use damaged or
altered batteries. Damaged
or altered batteries can be un-
predictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explo-
sion.
g) Follow all instructions
for charging and never
charge the battery or the
battery-powered tool
outside the temperature
range stated in the oper-
ating instructions. Incorrect
charging or charging outside
the permitted temperature range
may destroy the battery and in-
crease the risk of fire.
10
CY
6) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
b) Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
7) ADDITIONAL SAFETY
INSTRUCTIONS
a) Hold the appliance by the
insulated gripping surfac-
es when performing work
in which the tool may
come into contact with
hidden wiring. Contact with
a live wire can also cause a
charge in metal parts of the ap-
pliance and result in an electric
shock.
b) Hold the device by the in-
sulated gripping surfaces
when performing work in
which the cutting tool may
come into contact with
hidden wiring or its own
cord. If the screw were to come
into contact with a live electrical
cable, metal parts of the appli-